Material: plastic/plastic

Product Category: Helicopter

Specifications: mini3pro buoyancy bar

Whether static model: no

Control method: none

Whether electric: no

3C configuration category: toys over 14 years old

Applicable age: youth (15-35 years old)

Product name MINI 3 PRO (Increasing tripod + buoyancy bar set)

Product size 22.3x20x8.9 cm

Applicable models DJI MINI 3 Pro

Foldable design for portable storage

The height-enhancing stand is made of high-quality plastic material and can be folded

Sturdy and wear-resistant, but also easy to carry and store when going out

                          Before                                               After 

The tripod effectively increases the height by 5.3cm

The height of the tripod is increased by 5.3cm, which effectively protects the visual and infrared obstacle avoidance system below.

Expandable buoyancy bar

Sophisticated design and careful use of O-ring mounting and fixing to the booster stand

Easy installation and quick disassembly

Lightweight and non-weight-bearing

The net weight of the height-increasing tripod is 23.7g, which does not affect the flight speed and does not cause flight burden.

Installation steps

(Increasing tripod + buoyancy bar)

1. Hook the small rubber ring on the raised part of the side of the height-enhancing tripod, and at the raised part of the bottom, and the other side is the same.

2. Align the connector on the front of the booster stand with the connector on the bottom of the drone fuselage.

3. Secure the thick O-ring from one side of the heightening stand to the other side.

4. Place the buoyancy bar, use a thin O-ring to fasten one side, and wrap it around to the other side to fix it.

5. Installation is complete

Installation steps

(higher tripod)

1. Hook the small rubber ring on the raised part of the side of the height-enhancing tripod, and at the raised part of the bottom, and the other side is the same.

2. Align the connector in front of the height-enhancing stand with the connector on the bottom of the drone fuselage

3. Wind the thick O-ring from one side of the heightening stand to the other side to fix it.

4. Installation is complete

Please pay attention

Remove the rubber band when storing the folding stand

When installing the buoyancy rod, fasten the thin O-ring in the opposite direction